How to Install:
The installer completes the strapping process as normal. The Saddle is inserted on the strap then slid down to the bottom of the duct where the load distributing effect supports the duct without sagging.
The strapping simply slides sideways into “H” cut of the patented strap channel. The saddle slides forward until the strap clears the front tongue. Then the saddle is pulled backward until the strap rests in the strap locator section, which holds the strapping in place.
The saddle is now installed. The ducts can be pulled taut, which creates a smooth inner liner, holds the duct in a fully expanded state and provides the lowest amount of friction possible.